Parker HAS Series - Diagnostics; 6901 Keypad LED Indications

Hydraulic and Electrohydraulic Actuators
HAS Series Analog Drives Manual
73
Parker Hannifin Corporation
Cylinder Division
Des Plaines, Illinois USA
www.parker.com/cylinder
Catalog HY08-4005-M3
WARNING: This product can expose you to chemicals including Lead and Lead Compounds which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
PROP 65 WARNING
Diagnostics
The LEDs are labelled HEALTH, LOCAL (as SEQ and REF), RUN,
STOP, FWD and REV. Combinations of these LEDs have the
following meanings:
HHEEAALLTTHH RRUUNN
SSTTOOPP DDrriivvee SSttaattee
Re-Configuration
Tripped
Stopped
Stopping
Running with zero speed demand or enable false or
contactor feedback false
Running
Running
Autotuning
Auto Restarting, waiting for trip cause to clear
Auto Restarting, timing
OFF
FLASH
ON
AAlleerrtt MMeessssaaggee DDiissppllaayyss
A message will be displayed on the Keypad when
either:
• A requested operation is not allowed:
The top line details the illegal operation, while the bottom line
gives the reason or cause. See example opposite.
• The drive has tripped:
The top line indicates a trip has occurred while the bottom line
gives the reason for the trip. See example opposite.
Most messages are displayed for only a short period, or for as long as an
illegal operation is tried, however, trip messages must be acknowledged by pressing the EE key.
* KEY INACTIVE *
REMOTE SEQ
* * * TRIPPED * *
* HEATSINK TEMP
PPaarrkkeerr HHaannnniiffiinn CCoorrppoorraattiioonn
Cylinder Division
Des Plaines, Illinois
70
wwwwww..ppaarrkkeerr..ccoomm/
cylinder
6901 Keypad LED Indications