M
Mary ChapmanSep 8, 2025
What to do if the command signal carries too much ripple in Parker Control Unit?
- DDawn DanielsSep 9, 2025
If the command signal carries too much ripple, reduce the ripple.
To Next PageTo Next PageWhat to do if the command signal carries too much ripple in Parker Control Unit?
If the command signal carries too much ripple, reduce the ripple.
What to do if there is central connector contact failure in Parker RE06M T?
If there is a central connector contact failure, clean the contacts or replace the connector.
What to do if the feed cable is without shielding in Parker RE06M T?
If the feed cable is without shielding, change the cable grade.
General| Brand | Parker |
|---|---|
| Model | RE06M T Series |
| Category | Control Unit |
| Language | English |
Details on the ordering code for the RE06M*T series valve.
Details on the ordering code for the RE*T series valve.
Details on the ordering code for the RE*E*T series valve.
Details on the ordering code for the R*V series valve.
Details on the ordering code for the R5V series valve.
Illustrates the block diagram for integral electronics of the valve.
Describes the key features and functions of the integral valve driver.
Provides general technical details like design, operation, and temperature range.
Details concerning fluid type, viscosity, filtration, and pressure.
Covers duty ratio, voltage, current, and signal specifications.
Shows an example of the valve's name plate for identification.
Explains the meaning of symbols used throughout the manual for safety and instructions.
Instructions regarding valve markings, name plates, and work by qualified personnel.
Defines intended application, manufacturer liability, and general product use instructions.
Specifies conditions for proper storage of the valve to prevent damage.
Details what is included in the delivery and initial checks required.
Instructions on how to correctly mount the valve and details on available bolt kits.
Specifies operational boundaries and environmental conditions for the valve.
Information and recommendations for various pressure fluid types used with the valve.
Importance of fluid cleanliness, filter requirements, and flushing methods.
Procedure for bleeding air from the hydraulic system after maintenance or startup.
Details on the required connectors, cable type, dimensions, and length.
Instructions for proper assembly of shielding, grounding, and connection integrity.
Specifies voltage range, ripple, and CE mark compliance for the power supply.
Explains command signal behavior, filtering, and specific options like 4-20mA.
Introduction to the ProPxD software for setting valve parameters.
Lists necessary hardware and cable specifications for using the software.
Step-by-step guide for installing the ProPxD software on a PC.
Instructions on operating the ProPxD software, including parameter saving.
Explanation of parameter groups (S, P, J) and their characteristics.
Detailed overview and description of parameters for basic mode operation.
Detailed overview and description of parameters for expert mode operation.
Lists common error messages and their corresponding solutions for the ProPxD software.
Provides a systematic approach to diagnose and fix common valve malfunctions.
Lists available accessories such as connectors and bolt kits for the valve series.
Details spare parts and seal kits available for different valve types.
