Parker Vansco VMM1210 - Controlling Motor Speed

User Guide 53
Application Examples
The following shows how to connect three VMM1210s together in a system to
control indicator lights:
Rear Left Signal Light
Right Turn Signal Switch
Left Turn Signal Switch
Hazard Signal Switch
Front Right Signal Light
Front Left Signal Light
Rear Right Signal Light
Rear
Cabin
Front
VBAT VBAT
VBAT
CAN
3.3k 3.3k
3.3k
Figure 27: Indicator light connections
10.3. Controlling Motor Speed
The VMM1210 can be used to control the DC motor speed of motors that provide
a tachometer output.
Note: The VMM1210 has Proportional Integral Differential (PID) capabilities
that make it possible to control devices like proportional valves through