Parker Vansco VMM1210 - Test

User Guide 65
Test
The following table lists the verification tests that were performed for the
VMM1210:
Test Specifications
Ref #
Test Specification
Test Description
Deviation?
1.
J1455 (Jun 2006)
Section 4.1.3.1
24 Hour Thermal Cycle
Yes
1
2.
J1455 (Jun 2006)
Section 4.1.3.2
Thermal Shock
No
3.
EP455 (Feb 03)
Section 5.1.2
Storage Temperature (non-
operational)
No
4.
J1455 (Jun 2006)
Section 4.2.3
24 Hour Humidity Cycle
No
5.
EP455 (Feb 03)
Section 5.13.2
Humidity Soak
No
6.
J1455 (Jun 2006)
Section 4.3.3
Salt Spray Atmosphere
Yes
2
7.
EP455 (Feb 03)
Section 5.8.2
Chemical Exposure
Yes
3
8.
EP455 (Feb 03)
Section 5.4.1
Solar Radiation - UV Effects
No
9.
EP455 (Feb 03)
Section 5.6 Level 1
Pressure Wash (non-operational)
No
10.
EP455 (Feb 03)
Section 5.5 Level 2
Immersion (non-operational)
No
11.
J1455 (Jun 2006)
Section 4.10.4.2
Random Vibration
No
12.
J1455 (Jun 2006)
Section 4.11.3.1
Handling Drop (non-operational)
No
13.
J1455 (Jun 2006)
Section 4.11.3.3
Harness Shock (non-operational)
No
14.
EP455 (Feb 03)
Section 5.14.1
Operational Shock
No
1
Temperature cycle performed at 3 different voltages: 9V, 28V and 32V DC.
2
Signs of corrosion are acceptable provided the integrity of seal is maintained.
3
Test performed on enclosures only without PCB. Only physical signs of detrimental corrosion shall be considered a failure.
12. Test