Parker Vansco VMM1210 - Mounting the VMM1210 to a Vehicle; Electrical Installation Guidelines

User Guide 49
Installation
9.1.3. Mounting the VMM1210 to a Vehicle
It is up to the original equipment manufacturer (OEM) to ensure the product is
securely mounted to the vehicle.
The following guidelines are related to physically attaching the VMM1210 to a
vehicle:
 Secure the VMM1210 with bolts in all bolt holes using Hex Head 1/4"-20 or
equivalent metric size (6 mm) bolts.
 The bolts should be tightened according to the fastener manufacturer's
tightening torque specifications.
9.1.3.1. Recommended Mounting Orientation
The VMM1210 should be mounted vertically so moisture drains away from it, as
shown in the following:
Figure 25: Recommended mounting orientation
9.2. Electrical Installation Guidelines
Use the following guidelines when installing the VMM1210 in a vehicle.
9.2.1. Designing and Connecting the Vehicle Harness
The vehicle manufacturer is responsible for designing a vehicle harness that mates
with the VMM1210 connector(s).