PAGE 74
PROFILE PARAMETERS
Programmable Profiles 8 user programmable profiles
Segments 1 to 6 segments per profile
Ramp and Soak 1 ramp and soak per segment
Profile Time Base Selectable:
HHH.T (hours and tenths)
HH.MM (hours and minutes)
MM.SS (minutes and seconds)
EO Option:
Units per hour ramp rate, HHH.T soak time
Units per hour ramp rate, HH.MM soak time
Units per minute ramp rate, MM.SS soak time
Profile Interrupt Action Upon return of AC power either:
Go to OFF mode
Continue profile
Go into HOLD
Restart profile at beginning
Profile Loop Count 1 to 9999, 0=continuous
Profile End Control Selectable:
Hold at last setpoint
Abort (all outputs off or 0%)
Transfer to another profile
Assured Soak Deviation Hold after Ramp Up;
1 to 3000 units, 0=no auto hold
Deviation Hold after Ramp Down;
1 to 3000 units, 0=no auto hold
Remote Run/Hold Selectable:
Override RUN/HOLD key
Allow RUN/HOLD key to function
Event Outputs 3 possible event outputs. Each event can be set on or off
for each ramp and soak.
To Next Page
Loading...
