Partner SP-850 - Figure 2.6 SATA Configuration Sub-Menu; SATA Configuration

16 CHAPTER 2 BIOS SETUP
SATA Conguration
SATA Controller(s)
Use this item to enable or disable the on-chip SATA controller. The default setting is Enabled.
SATA Controller Mode
This item is used to congure SATA mode. The default setting is SATA.
SMART Self Test
This item is used to enable monitoring of hard disks that support the S.M.A.R.T. (Self-Monitoring And
Reporting Technology) feature, which can allow the hard disk to report, under some circumstances,
impending failures of the hard disk.
Figure 2.6 SATA
Conguration sub-menu