Partner SP-850 - PCH IO Configuration; Figure 2.14 PCH IO Configuration Sub-Menu

24 CHAPTER 2 BIOS SETUP
PCH IO Conguration
Figure 2.14 PCH IO
Conguration sub-menu
Onboard LAN Device
Use this item to enable or disable the onboard LAN controller. The default setting is Enabled.
Onboard LAN Boot ROM
This feature allows you to enable or disable the onboard LAN boot ROM to boot system.
Mini PCI Express Port
This item allows you to enable or disable the Mini PCI Express device.
ASPM
This item is used to select the level of PCI Express Active State Power Management.
Speed
This item is used to select speed for PCIe.
Detect Non-Compliance Device
When enabled, system will detect non-compliance PCIe device, and take longer at POST time.
EUP
When enabled, the system will meet EuP requirement.