PBI Dansensor MAP Check 9000 - Submenus

PBI-220047-F 01/2008 COPYRIGHT © PBI-Dansensor A/S
4. Operation MAP Check 9000 - User Manual
14
4.8. Submenus
MAP Check 9000 has at least three submenus as shown in Fig. 4.
Fig. 4. MAP Check 9000 submenus
•Press  and  simultaneously for three seconds.
•You now have access to the submenus:
The setup menu (
set.)
The diagnostics menu (
Dia.) and
The calibration menu (
cal.).
Regardless of the currently active menu the device will return to reading of current O
2
if no
key is activated for approx. 20 seconds. The parameters in the diagnostics menu can be
set to constant output.
•Press
 to go to the next submenu.
20.9
set.
flo.l
flo.h
del.
pa.1
pa.2
pa.3
cal
cal1
cal2
cal3
cal4
cal5
dia.
emf.
tpt.1
tpt.2
offs
ti.po
ti.ca
ti.pu
s.ref.
prg.
flo. al.1 al.2
3 sec.