PBI-300042-B 10/2010 COPYRIGHT © PBI-Dansensor A/S
42 User Guide EN CheckMate 3
User setup ...
Selecting User setup ... from the General setup menu will display a screen showing the User
setup parameters.
From here the user database is maintained. You can see a list of existing users, edit the
settings for an existing user, create new users or delete users.
Users are created with a unique User name (max. 20 characters) and a unique login User ID
(max. 40 characters).
The set-up of the login function is defined according to table below:
User log in Log in with ID Function
No No No login required (default setting)
At start-up the device will automatically run the
self-test and warm-up period and when finished
it changes to show the measuring screen and
will be ready for measuring.
Yes No User login required
At start-up you are prompted to select user from
appearing list and when done the device will
run the self-test and warm-up period and when
finished it changes to show the measuring
screen and will be ready for measuring.
Yes Yes Login with User ID required
At start-up you are prompted to enter User ID
either by keying it in from the touch screen key-
board or by using a barcode scanner (option).
When done the device will run the self-test and
warm-up period and when finished it changes to
show the measuring screen and will be ready
for measuring.
No Yes Not possible!
Setting User login to No will automatically
change Login with ID to No.
User setup ...
13:46
08/17/06
Show users
Edit user
New user
Delete user
User log in: Yes
Log in with ID: Yes
To Next Page
Loading...
