Peavey DPM C8p - 3.9 MIDI Data Filter

3.9 MIDI Data Filter
Data can be filtered from the MIDI data stream appearing at each MIDI in.
To select the parameter to be filtered or passed, place the cursor over the Filter TYPE parameter. The following
types of data can be filtered:
^ System Exclusive data
+* System Common data
System Real Time data
All Notes Off command
** Reset All Controllers
Volume
Pitch Wheel
+* Sustain Pedal
+* Channel Pressure
Key (Polyphonic) Pressure
+* Modulation Wheel
** Program Change
Notes
The FilTogl (Filter Toggle) soft button passes or filters data for the selected parameter. Select each parameter
Type, then use FilTogl to choose whether data is passed or filtered.
3.10 Accessing Other Pages
Note that you can also access the Bulk Dump page (section 30 by pressing the appropriate soft button. (C8 only)