Peavey DPM C8p - 5.2 All Presets; 5.3 Global Data; 5.4 All Data; 5.5 SysEx Buffer (C8 Only)

5.2 A LL PRESETS
Saves all presets to disk or as SysEx via MIDI. Press Select: if disk is the destination, a directory of All Presets
disk files appears. Press SAVE and a .screen will appear that lets you name the file and add a descriptive
comment about the file. For information on naming, see section 2.18. Press SAVE, and all presets will be
copied to disk.
5.3 GLOBAL DATA
Saves all global data to disk or as SysEx via MIDI. Press Select; if disk is the destination, a directory of Global
Data disk files appears. Press SAVE and a screen will appear that lets you name the file and add a descriptive
comment about the file. For information on naming, see section 2.18. Press SAVE, and all global data will
lx? copied to disk.
5.4 ALL DATA
This function saves all data to disk or as SysEx via MIDI. Press Select; if disk is the destination, a directory
of All Data disk files appears. Press SAVE and a screen will appear that lets you name the file and add a
descriptive comment about the file. For information on naming, see section 2.18. Press SAVE, and all data
will be copied to disk.
5.5 SYSEX BUFFER (C8 ONLY)
This function saves SysEx buffer data to disk. Press Select; a directory of SysEx disk files appears. Press SAVE
and a screen will appear that lets you name the file and add a descriptive comment about the file. For
information on naming, see section 2.18.
Press SAVE, and data in the SysEx buffer will be copied to disk.
5.6 DISK (C8 ONLY)
To load one preset from disk:
1. With Disk as the source and One Preset as the destination , press Select: a directory of disk files appears.
2. Select the file containing the single preset to lx? loaded, then press the Load_l soft button. The following
screen appeal's:
Single Program Load
FROM: CRPRESET.C8P > 61 Preset Marne
TO ! INTERNAL MEM, 08 Preset Mane
iniasm ^
3. Place the cursor on the preset number in the first line to select the preset to be loaded.
4. Place the cursor on the preset number in the second line into which the disk preset will be loaded.
5. Press Copy. The display Hashes Function Complete to show that the preset has been loaded.