www.pegasustech.com.br 3
STORAGE INFORMATION
If the regulator needs to be stored for a short time before its installation and / or commissioning, the
following precautions must be taken:
➢ The Regulator must be kept in its original packaging or packaging that meets the same safety
conditions against mechanical damage, excessive temperature and humidity to prevent
oxidation of contacts and metal parts, damage to integrated circuits;
➢ The duly conditioned regulator must be stored in a dry, ventilated place where there is no
direct effect of the sun's rays, as well as rain, wind and other inclemencies, in order to
guarantee the maintenance of its functional characteristics;
➢ After the regulator is properly packed and accommodated in such a way that it does not
absorb the vibrations and impacts suffered during transport, it will be able to be transported
by the different means.
➢ Failure to comply with the above recommendations may void the supplier of the equipment
from any liability for the damage, as well as loss of warranty on the equipment or damaged
part.
Failure to comply with the above recommendations may exempt the
supplier any liability for consequential damages, and loss of warranty on
the equipment or damaged part.
To Next Page
Loading...