Pellas X S.Control User Manual

8
7. USER MENU STRUCTURE
Boiler settings
Preset boiler temperature
Weather control boiler *
Heating curve *
Curve shift *
Room temperature factor*
Output modulation
 Max. burner power
 Blow-in output- max. power
 Oxygen revision- max. power
 H2 Hysteresis
 Blow-in revision- medium power
 Oxygen revision- medium power
 H1 Hysteresis
 Blow-in revision- min. power
 Oxygen revision- min. power
 Boiler hysteresis HK
 Blow-in/ grate output*
 Exhaust fan blow-in/ grate output*
 Underpressure- grate*
Operation mode
 Pellet
 Grate
Regulation mode
 Standard
 FuzzyLogic
 FL Lock
Fuel type
 Pellet
 Agropellet
Cleaning level*
 Normal
 Increased
 Intensive
Fuel level
 Alarm level
 Fuel level calibration
Burner cleaning
Lambda probe calibration*
HUW settings
Preset HUW temperature
HUW pump mode
 Off
 Priority
 No priority
HUW cont. hysteresis
HUW disinfection
SUMMER mode
SUMMER mode
 Winter
 Summer
 Auto*
Activation temperature SUMMER*
Deactivation temperature SUMMER*
Mixer settings 1-5
Preset temperature
Mixer room thermostat
Weather control mixer **
Heating curve*
Curve shift *
Room temp. factor*
Night time decrease
Boiler:
 On
 Schedule
Mixer 1-5*:
 On
 Value decrease
 Schedule
HUW container*:
 On
 Value decrease
 Schedule
Circulation pump *
General settings
Clock
Screen brightness
Screen contrast
Sound
Language
WiFi*
*Not available if proper sensor or additional module
is not connected or the parameter is hidden.
Main menu
Information
Boiler settings
HUW settings*
Summer/ Winter
Mixer 1-5 settings *
Night time decrease
General settings
Manual control
Alarms
Service settings

Pellas X S.Control Specifications

General

Brand	Pellas X
Model	S.Control
Category	Controller
Language	English