TYING MACHINE FIXION 2
29_133084-G
5. Connect the charger plug (29) to the mains. The
charger LED lights up green.
Caution
Before connecting the charger to
the mains, check that your power
system characteristics comply with
the specifications given on the charg-
er (see Section 3.2, “Technical fea-
tures”).
6. Partly detach the guard (14) (or the adaptable dis-
penser (6)). If the adaptable dispenser (6) is fitted,
make sure the tie cord has been withdrawn from the
tool intake opening.
7. Connect the charging cord to the tying machine's
charging connector (16). The charger LED turns red.
26
To Next Page
Loading...
