TYING MACHINE FIXION 2
29_133084-G
8. When the gauge display (21) flashes, the battery is
charging. Charging is complete when the message
appears steadily on the gauge display (21).
9. Once the battery is charged, first disconnect the
charging cable from the charging connector (16) and
then the mains plug from the charger (29).
Note
After a long storage period (new battery, winter
storage etc.), when you disconnect the charger, the
charge level indicator may display a value of less
than 99%. This is a normal phenomenon which can
reoccur for up to 5 charge cycles with normal use
between each charge.
10. Replace the guard (14) on the back of the tying ma-
chine (or the adaptable dispenser (6)).
27
To Next Page
Loading...
