pellenc Prunion - Putting the Lead and Wrist Strap in Place; Use; Usage Tips

18
MAX
%
56_14_023A
SETTING MODES
Removing your nger from the trigger opens the blades wide, no matter which function is
chosen.
Mode U4. GRADUAL
• Gradual, fast operation, with half-opening
• The pruning shears LED is orange when operating.
• The pruning shears LED ashes orange on standby.
The blade stays half-open as long as the optical system (1) detects your nger on the trigger.
When your nger releases the trigger, the optical system tells the blade to open fully.
This option helps when cutting small wood, thus saving energy.
After a few minutes' use, this optical system becomes an essential feature of your daily work.
The kind of gloves worn can have an effect on the way the optical trigger works.
We recommend not wearing black gloves.
If the optical trigger stops working properly, check that there is nothing obstructing the
slot in the trigger or clean the window of the optical sensor with rubbing alcohol.
OPTICAL TRIGGER