pellenc Prunion - Introduction; Safety Instructions

3
INTRODUCTION
Dear Customer,
Thank you for purchasing the
Prunion/Vinion pruning shears. Correctly used and maintained, this tool will
give years of satisfactory performance.
Comply with the regulations in force in your country as concerns environmental protection
associated with your activity.
SAFETY INSTRUCTIONS
PLEASE SAVE THESE INSTRUCTIONS
This manual contains important information and operating instructions for the following
tool: /Vinion electronic pruning shears and battery model ULiB 250.
It is ESSENTIAL that you familiarise yourself COMPLETELY with this user guide.
Before use, read all instructions and warnings featured on the battery charger, the battery and the
product using the battery.
Always comply with the instructions and illustrations in the manual.
• The "Pellenc tools" battery is a professional tool, for use only with compatible PELLENC tools.
• The PELLENC company accepts no responsibility for any damage caused by improper or unspecied
use different from its original intention.
• The PELLENC company accepts no responsibility for any damage caused by the use of non-original
parts or accessories.
ENVIRONMENTAL PROTECTION
Your equipment comprises numerous materials which can be valorised or recycled.
Entrust these to your reseller or to an approved service centre so that they can be
processed.
All through this user guide you will nd advisory notes and information entitled: REMARK, CAUTION /
WARNING.
A REMARK provides additional information, claries a point or explains a step to be followed in detail.
The CAUTION and WARNING advisories are used to dene a procedure which, if neglected or incorrectly
performed, may lead to serious damage to the equipment and/or personal injury.
This advisory:
G
indicates that if the procedures or instructions are not complied with, any damage will not
be covered by the warranty and the owner will be responsible for the repair costs.
Safety indications are also given on the tool; they remind you of the safety precautions to be taken. Identify
and read these indications before using the tool. Immediately replace any indications that may become
partially illegible or deteriorated.
Refer to the «SAFETY INDICATIONS» heading in order to identify the location of the safety
indications on the tool.
No part of this manual may be reproduced without the written consent of PELLENC. The illustrations
given in this manual are for information purposes and are in no way contractual. PELLENC reserves the
right to make any modication or improvement to its products as deemed necessary without informing
customers already in possession of a similar model. This manual forms an integral part of the tool and must
accompany the tool if it changes hands.