CHARGING THE BATTERY
When the battery is discharged, the tool stops
automatically.
The gauge display is off and the buzzer beeps (see
"MESSAGES TABLE" page 28).
A. Press the on/off buttons (6) and (7) at once.
B. Place the charger and battery in a dry, ventilated
and dust-free room at 10-25°C. Place the battery lying
in a horizontal position.
Before using the battery for the rst time at the start of a new season, it must be fully
charged (99% steady).
ATTENTION:
Before connecting the charger to the
power outlet, check that the power
system characteristics comply with the
specications given on the charger (see
"Specications" on page 10).
C. Connect the charger power connector (1) to the
power outlet. The charger LED lights up green.
D. Connect the charging cord (2) to the battery's
charging connector (3). The charger indicator (4) lights
up green, and the battery indicator (5) ashes orange.
To Next Page
Loading...
