pellenc Prunion - Transport; Storage; Storage; Accessories and Consumables

31
MACHINES DIRECTIVE 2006/42/CE
(ONLY CONCERNS EUROPE)
"EC" DECLARATION OF CONFORMITY
MANUFACTURER PELLENC S.A.
ADDRESS QUARTIER NOTRE-DAME
ROUTE DE CAVAILLON - B.P. 47
84122 PERTUIS CEDEX (FRANCE)
PERSON/ENTITY AUTHORISED TO COMPILE THE TECHNICAL
DOSSIER
PELLENC S.A.
ADDRESS QUARTIER NOTRE-DAME
ROUTE DE CAVAILLON - B.P. 47
84122 PERTUIS CEDEX (FRANCE)
WE HEREBY DECLARE THAT, FOR THE MACHINE HEREINAFTER REFERRED TO AS :
GENERIC DENOMINATION ELECTRIC PRUNING SHEARS
FUNCTION INTENDED FOR PRUNING
COMMERCIAL NAME PRUNION
TYPE
- SELF-CONTAINED
- ADAPTABLE
MODEL PRUNION
SERIAL No. 32Q00001 - 32Q49999
COMPLIES WITH THE PERTINENT PROVISIONS OF THE MACHINES DIRECTIVE (2006/42/CE)
AND COMPLIES WITH THE PROVISIONS OF THE FOLLOWING OTHER EUROPEAN DIRECTIVES:
- ELECTROMAGNETIC COMPATIBILITY (2004/108/CE)
- LIMITATION OF THE USE OF HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT (2011/65/EU)
- RECYCLING AND RECOVERY OF ELECTRICAL AND ELECTRONIC WASTE (2012/19/EU)
THE FOLLOWING HARMONIZED EUROPEAN STANDARDS WERE USED:
- EN 55014-1 : 2006 + A1 : 2009 + A2 : 2011
- EN 55014-2 : 1997 + A1 : 2001 + A2 : 2008
- EN 61000-3-2 : 2006 + A1 : 2009 + A2 : 2009
- EN 61000-3-3 : 2013
- EN 60745-1 : 2009 + A11 : 2010
CONCLUDED AT PERTUIS, DATED 01/12/2015
ROGER PELLENC
CHIEF EXECUTIVE OFFICER