PRUNING SHEARS AND 150 BATTERY VINION & PRUNION
26_116772-H
Important
The adapter, ref 132371, ensures compatibility between the CB5010 charger and 150/150P batteries.
4. START UP
1. Remove pruning shears, battery and belt from the packaging.
2. Check that the battery is actually turned off
Before using the battery for the first time, it must be fully charged (99% steady). (See ???)
Note
Considering the machining accuracy of the pruning shear components, to achieve optimal performance, a
breaking-in period of 2 to 3 days is useful and will allow you to appreciate the reduction in consumption and
noise.
4.1. PUTTING THE PRUNING HOLSTER ON THE BELT
15
To Next Page
Loading...
