pellenc Prunion - Introduction; Safety; General Safety Instructions for the Electrical Tool

PRUNING SHEARS AND 150 BATTERY VINION & PRUNION
26_116772-H
1. INTRODUCTION
Dear Customer,
Thank you for purchasing your Pruning shears and 150 battery Vinion & Prunion. Correctly used and maintained,
this tool will give a satisfactory performance for many years.
Warning
Your device contains numerous recoverable or recyclable materials. Return it to your
dealer or, failing this, to an approved servicing centre to be treated.
Comply with the regulations in force in your country as concerns environmental protection associated with your
activity.
Warning
It is imperative that you read through the ENTIRE user’s manual before using or servicing the
tool. Always comply with the instructions and illustrations in the manual.
All through this user guide you will find advisory notes and information entitled: REMARK, CAUTION / WARNING.
A REMARK provides additional information, clarifies a point or explains a step to be followed in detail.
WARNINGS or CAUTIONS call attention to a procedure which, if not performed or incorrectly performed, could
cause physical damage and/or serious injury.
This advisory: G indicates that if the procedures or instructions are not complied with, any damage will not be
covered by the warranty and the owner will be responsible for the repair costs.
Safety indications are also given on the tool; they remind you of the safety precautions to be taken. Identify and
read these indications before using the tool. Immediately replace any indications that may become partially illegible
or deteriorated.
Refer to the "SAFETY SIGNS" section, which shows where the signs are on the tool.
No part of this manual may be reproduced without the written permission of the company PELLENC. The illustra-
tions provided in this manual are for information purposes and are in no way contractual. The PELLENC company
reserves the right to make any modification or improvement to its products as deemed necessary without inform-
ing customers already in possession of a similar model. This manual forms an integral part of the tool and must
accompany the tool if it changes hands.
2. SAFETY
2.1. GENERAL SAFETY INSTRUCTIONS FOR THE ELECTRICAL TOOL
Warning
Read all the safety measures, instructions, illustrations and specifications provided with
this electric power tool. Failure to comply with the following instructions risks causing electric
shock, fire and/or serious injury.
5