EasyManua.ls Logo

pellenc Prunion - The Battery; Charging

pellenc Prunion
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRUNING SHEARS AND 150 BATTERY VINION & PRUNION
26_116772-H
3. After configuring the usage mode allowed for the user, turn the battery off, then reconnect the tool,
4. If you need to change mode again, the above procedure has to be repeated.
5.5. THE BATTERY
The battery has a gauge display showing the remaining capacity it holds. The capacity
is expressed as a percentage.
If the display shows , the battery is fully charged.
If after a day's work, the display shows , there is no need to recharge the battery.
If the display shows , or very close to it, it must be recharged at once.
The battery gauge must be used like a fuel gauge on a car.
Note
If the battery is not used for 10 days, it discharges automatically to prepare for storage. During this phase it
will become warm.
5.5.1. CHARGING
Important
Before using the battery for the first time at the start of a new season, it must be fully charged (99% steady).
24

Table of Contents

Other manuals for pellenc Prunion

Related product manuals