PRUNING SHEARS AND 150 BATTERY VINION & PRUNION
26_116772-H
Connect the charging cord (2) to the battery's charging
connector (3). The charger indicator (4) lights up green,
and the battery indicator (5) flashes orange.
When the gauge display (6) flashes, the battery is charg-
ing. Charging is complete when the message appears
steadily on the gauge display (6).
Once the battery is charged, disconnect the charging
lead on the battery first (1), then the charger power con-
nector (2).
Note
After a long storage period (new battery, winter
storage etc.), when you disconnect the charger, the
charge level indicator may display a value of less
than 99%. This is a normal phenomenon which can
reoccur for up to 5 charge cycles with normal use
between each charge.
6. SERVICE
If cutting is no longer sharp and effortless, this means that it is using more energy than necessary. Check the
following points:
1. the sharpness of the blade,
2. the tightness of the blade,
3. the general condition of the pruning shears.
26
To Next Page
Loading...
