EasyManua.ls Logo

pellenc Prunion - Page 25

pellenc Prunion
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRUNING SHEARS AND 150 BATTERY VINION & PRUNION
26_116772-H
When the battery is discharged, the tool stops automati-
cally. The gauge display goes off, and the buzzer beeps
once. Then consult ???.
Press the on/off buttons (6) at once.
Important
Before using the battery for the first time at the start
of a new season, it must be fully charged (99%
steady).
Place the charger and battery in a dry, ventilated and
dust-free room at 10#25°C. Place the battery lying in a
horizontal position.
Caution
Before connecting the charger to the
mains, check that your power system
characteristics comply with the spec-
ifications given on the charger (see
Section 3.4, “Battery technical char-
acteristics”).
Connect the charger power connector (1) to the power
outlet. The charger LED lights up green.
25

Table of Contents

Other manuals for pellenc Prunion

Related product manuals