PRUNING SHEARS AND 150 BATTERY VINION & PRUNION
26_116772-H
2.1.7. TOOL’S END OF LIFE MANAGEMENT
1. When the tool reaches the end of its life, PELLENCkeeps the end of life sheet of the equipment at
disposal. The end-of-life sheet provides instructions for safely removing components.
2.2. SAFETY WARNINGS FOR BATTERY-POWERED SHEARS
1. Never modify the connector in any way whatsoever.
2. This tool may cause severe injuries. Read the instructions carefully about the proper handling, operation, main-
tenance, start-up and stopping of the tool. Familiarize yourself with all its controls and proper use.
3. Always switch off the battery when the machine is not in use (both LEDs must be off).
4. Make sure that the blade is not in contact with any object before starting the tool.
5. Never use the tool if it is damaged, incorrectly set or incompletely assembled.
6. Never remove or disable a safety device. Have the safety device repaired if is faulty.
7. Never disconnect the power cord of the tool without having checked that the red and green LEDs on the left
and right of the battery display are off.
8. Never carry the pruning shears suspended from the power cord.
9. Do not disassemble the pruning shears.
10. Do not try to cut pieces of wood that are too large or other materials than wood.
11. Please test the machine before use to check that it is working properly.
Battery off (2 LEDs off)
The battery is on (red LED and green LED lit)
2.3. SAFETY MEASURES ASSOCIATED WITH BATTERY USE
1. If not using the battery unit, store it away from other metal objects such as paper clips, coins, keys, nails, screws
or other such small metal items that might form a connection between the two terminals. Creating a short-circuit
between the battery terminals can lead to burns or cause a fire.
8
To Next Page
Loading...
