PRUNING SHEARS AND 150 BATTERY VINION & PRUNION
26_116772-H
11. COMPLIANCE STATEMENTS
11.1. "EC" DECLARATION OF CONFORMITY: VINION
MANUFACTURER PELLENC
ADDRESS Quartier Notre-Dame - 84120 Pertuis
(France)
ENTITY AUTHORIZED TO COMPILE THE TECHNICAL FILE PELLENC
ADDRESS Quartier Notre-Dame - 84120 Pertuis
(France)
We hereby declare that the machine referred to below as:
GENERIC DENOMINATION Pruning shears and 150 battery
FUNCTION Intended for pruning
COMMERCIAL NAME VINION
TYPE Self-contained
MODEL VINION
SERIAL No. 26S00001 - 26S49999
26T00001 - 26T49999
26U00001 - 26U49999
Complies with the relevant provisions of the machinery directive (2006/42/EC).
Complies with the provisions of the following European directives:
• 2014/30/EU EMC Directive
• 2011/65/EU ROHS Directive
• 1907/2006 REACH Regulation
• 2012/19/EU WEEE Directive
The following harmonised European standards have been used in whole or in part:
• EN 62841-1 : 2015
• EN 55014-1: 2006 + A1: 2009 + A2: 2011
• EN 55014-2: 1997 + A1: 2001 + A2: 2008
Total vibration values (triax vector sum) determined in accor-
dance with the EN 62841-1 standard (uncertainty of K=1.5 m/
s²)
a
h
< 2.5 m/s²
Acoustic power level measured (uncertainty of K=3 dB) L
WA
=80 dB MAX
Level of acoustic pressure measured at the work station (un-
certainty of K=3 dB)
L
pA
=70 dB MAX
SIGNED IN PERTUIS, ON 17/04/2019
JEAN-MARC GIALIS
CEO
35
To Next Page
Loading...
