EasyManua.ls Logo

pellenc Prunion - Optical Trigger

pellenc Prunion
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRUNING SHEARS AND 150 BATTERY VINION & PRUNION
26_116772-H
Mode U4: RAMP-UP (factory mode)
Gradual, fast operation, with half-opening.
The pruning shears LED is orange when operating.
The pruning shears LED flashes orange on standby.
Note
Removing your finger from the trigger opens the blades wide, no matter which function is chosen.
5.3. OPTICAL TRIGGER
The blade stays half-open as long as the optical system (1) detects your finger on the trigger. When your finger
releases the trigger, the optical system tells the blade to open fully.
This option helps when cutting small wood, thus saving energy. After a few minutes' use, this optical system becomes
an essential feature of your daily work.
Note
The kind of gloves worn can have an effect on the way the optical trigger works. We recommend not wearing
black gloves.
Important
If the optical trigger stops working properly, check that there is nothing obstructing the slot in the trigger or
clean the window of the optical sensor with rubbing alcohol.
20

Table of Contents

Other manuals for pellenc Prunion

Related product manuals