What does ERR3 mean on my Pentair AUTOTROL Performa 263 Control Unit and how do I fix it?
If your Pentair Control Unit shows an ERR3 error, it means the camshaft rotated for more than 5 minutes trying to find the Home position. If the motor keeps rotating indefinitely, replace the following components in this order: the wire harness, the motor, the optical sensor, and finally, the controller.
What does ERR 2 mean on my Pentair AUTOTROL Performa 263 Control Unit?
If your Pentair Control Unit displays 'ERR 2', it indicates that the controller power does not match 50 or 60 Hz. Try disconnecting and reconnecting the power. If the problem persists, you may need to obtain a controller or AC transformer that is appropriate for your power frequency.
General| Brand | Pentair |
|---|---|
| Model | AUTOTROL Performa 263 |
| Category | Control Unit |
| Language | English |
Explains the meaning of safety symbols used in the manual.
Identifies the location of safety labels on the product.
General warnings about potential risks during operation.
Details on valve body, flow rates, connections, and electrical ratings.
General safety warnings to observe before installation.
Guidelines for general, electrical, mechanical, and outdoor environments.
Specifics on mounting the valve on top of the tank.
Initial steps for filling the tank and checking for leaks.
To Next Page