Pentair COLOR SYNC CONTROLLER - Page 17

Color Sync Controller Installation Guide
16
17
Troubleshooting the Color Sync™ Controller (Continued)
PROBLEM/
FAULT
SYMPTOM CHECK SOLUTION
AllLightsare
not turning on.
One or some of
the lights are not
turning on.
Disconnectthelights,
then reconnect them
one by one. Be sure
the problem is not with
the lights.
If problem is with the lights;
replace faulty light(s). If
problempersists,make
sure the correct transformer
(XFRMR)output12/13/14
VACisselectedfortheload
andcablelengths:Referto
the Transformer
Installation and Guide. If
problem still persists then
replace Controller.