To Next PageTo Next Page
Need help?Do you have a question about the Pentair SOLARTOUCH 521592 and is the answer not in the manual?
General| Model | SOLARTOUCH 521592 |
|---|---|
| Type | Solar Controller |
| Display | LCD |
| Pump Control | Yes |
| Solar Heating Control | Yes |
| Pool/Spa Temperature Control | Yes |
| Freeze Protection | Yes |
| Temperature Sensors | 2 |
| Control Functions | Solar Heating, Pool/Spa Temperature, Freeze Protection |
| Compatibility | Pool and Spa Systems |
| Certification | UL Listed, cUL |
Covers general safety, installer notes, and compliance with local building and health codes.
Details electrical safety precautions, GFCI requirements, wire types, and proper grounding procedures.
Instructions on how to adjust the desired pool or spa target temperature.
Explains the specific conditions required to start and stop the heating function.
Details the Solar Hold feature for variable speed pumps during heating and cooling cycles.
Details configuration settings and operational procedures for the cooling function.
Covers enabling, configuring, and operating freeze protection for the solar system.
Procedure to reset the controller to its original factory default settings via the Erase EEPROM menu.
Step-by-step instructions to adjust the calibration of water and solar temperature sensors.
Interpreting control panel LED status lights for errors and pump communication problems.
Critical safety warnings regarding electrical hazards during wiring and installation processes.
Instructions for connecting the controller to the primary electrical panel ground bus bar.
Procedure for connecting the controller and related equipment to the pool's bonding system.
Detailed instructions for connecting the controller to a 120 VAC power source.
Detailed instructions for connecting the controller to a 240 VAC power source.
