Pentair SOLARTOUCH 521592 - Time Clock and Pump Wiring Diagrams; Cleaner Pump Wiring; Solar Pump Wiring

SolarTouch
®
Solar Control System Installation and User’s Guide
SolarTouch
®
Solar Control System Installation and User’s Guide
Timeclockpooldailylteringoverride
When using a single speed pump, or an IntelliFlo
®
or IntelliPro
®
VS 3050 / 4x160
Pump, for daily pool filtering schedules SolarTouch
®
Controller requires the pump to be
connected to an external 24 hour time clock. In order to override the daily pool filtering
schedules, a two-pole timer or two-pole relay for switching the pump on or off is required.
CAUTION: All of the electrical wiring methods and materials used to complete the
electrical installation of the pool/spa system must be in accordance with the National
Electrical Code (NEC) or the Canadian Electric Code, as well as any local electrical
codes in effect at the time of installation. See page 17 for wiring diagram.
20
SOLAR BOOSTER PUMP (SINGLE SPEED) CONNECTED TO SPST RELAY ON
SOLARTOUCH
®
CONTROL SYSTEM CIRCUIT BOARD
SOLARTOUCH® CONTROL SYSTEM
CIRCUIT BOARD
CLEANER PUMP
TIME CLOCK
LINE 1
LINE 2
LOAD 1
LOAD 2
230 VAC (Cleaner Pump)
SPST RELAY
CLEANER PUMP CONNECTED TO SPST RELAY ON SOLARTOUCH
®
CONTROL SYSTEM CIRCUIT BOARD
R
ELAY
S
P
ST
BREAKER
Pressure Cleaner Pump
SOLARTOUCH® CONTROL SYSTEM
CIRCUIT BOARD
230 VAC (Solar Pump)
SPST RELAY
R
ELAY
S
P
ST
BREAKER
Solar Booster Pump
SolarTouch Controller Wiring Diagrams for Cleaner Pump and
Solar Pump