5. A list of available devices will appear. Once the device is
found, select that device from the list.
6. Authorize the pairing of the device by clicking “Pair”.
7. Once pairing is complete, if you are using the Pentair Pro
App, set up is complete.
If you are using the Pentair Home app, please proceed to the
screens to set up the WiFi connections as referenced in the
Homeowner Manual.
8. In the app the product will now show up in your
installed devices.
(Your device)
22 • FLECK 5800/5810/5812 XTR I Service Manual
To Next Page
Loading...
