IntelliCenter Control System Indoor Control Panel Installation Guide IntelliCenter Control System Indoor Control Panel Installation Guide
7
Using the USB Port to Import/Export a System Configuration
The following information describes how to import or export the IntelliCenter™ Automation System
For Pool and Spa configuration using a USB device. For more detailed information refer to the
IntelliCenter Automation System User’s Guide (P/N 522561).
Import from Local Saved
Import from USB
121ndrive
556sunsetblvd
77pkplace
120323_239elm.cfg
120315_41oakst.cfg
556sunsetblvd\
120422_556sunsetblvd.cfg
110802_556sunsetblvd.cfg
YesNo
Are you sure you want to replace the
120422_256sunsetblvd.cfg
Import System Configuration: Import from USB,
Import from local Saved.:These options will overwrite
the system configuration using a configuration file.
Navigate to the appropriate folder and select the
configuration file (.cfg) to import.
Import for USB: Insert a USB device into the USB
Port on the front of the IntelliCenter Automation System
Indoor Control Panel. Tap Import from USB and navigate
to the system configuration file .CFG). Follow the on
screen instructions to import the system configuration
files.
Import to Local: Tap Import from Local and follow the
on screen instruction
Import System Configuration: Use this feature to import a system configuration.
To access the Import/Export screen from the Home
screen, tap Settings > Advanced System
Configuration > Import/Export.
Note: Once a USB device is detected, a USB icon is
displayed on the upper right corner of the screen.
Export to USB
Save Locally
Export Local Configuraon to USB
121ndrive
Root
556sunsetblvd
77pkplace
996nlsd
Export System Configuration: Export from USB or local. Use this option to export a system
configuration file to a USB device. Select a location for the configuration file and follow the screen
prompts.
To Next Page
Loading...
Need help?
General
