Pentair INTELLICENTER Installation Guide

IntelliCenter Control System Indoor Control Panel Installation Guide IntelliCenter Control System Indoor Control Panel Installation Guide
1
Welcome! This guide describes how to install the IntelliCenter System Indoor Control Panel. Please take
time to read through this guide to familiarize yourself with the IntelliCenter System Indoor control Panel
installation steps.
The IntelliCenter System Indoor Control Panel provided one touch controls for your pool, spa, lights and
other functions from inside your home or a sheltered location. Select a convenient wall
location inside your house or other weather-protected location for mounting the control panel.
IntelliCenter™ Automation System for Pool and Spa
Indoor Control Panel Installation Overview
• 4” x 2.5” capacitive touch sensitive color touch
screen with finger tap navigation,
1280 x 720 resolution
• Day Time and Night Time color screen modes
• Multifunction Schedules/Programs
• Adjustable schedule timer for easy system
scheduling
• 100 Schedules/Programs
• Adjustable schedule timer for easy system
scheduling
• Wireless Control Panel "Deep Sleep" extend
battery life feature
• 64 Feature Circuits: Allow additional speeds on a
variable speed pump or an actuator to be assigned
without using an existing auxiliary circuit.
• 16 Groups: Assign groups of lighting, heaters,
pumps circuits that can be controlled by a single
button.
• Supports up to 16 IntelliFlo
®
VF and VS Pumps
• Supports up to four SpaCommand
®
and iS10
Spa Side Remotes, and 2 iS4 and QuickTouch
®
II
Wireless Spa Side Remotes
• Supports IntelliBrite
®
LED Color lights
• Valves: Intake/Return plus A and B valve circuits.
Expandable up to 13 valves.
• 20 custom circuit naming - 92 Pre-installed names
• Indoor Control Panel, Wireless Hand-Held Remote,
Outdoor Control Panel
• IntelliChlor
®
and iChlor
®
Salt Chlorine Generator
compatibility
• 40 Auxiliary circuits (includes three Expansion
Panels)
Features
• 32 Feature circuits
• Spa, Manual Heat Function
• Supports two separate bodies of water
using model i10D Personality Card
• System Reboot from touch screen control
panels
• Spa Side Control Enable/Disable
• Solar Heating Option/Support
• 16 Heat Pump Support: RS485 Support,
Heat Pump Cooling Support.
• Safety and Functional Delay(s) and Cancel
Systems Delays
• Real Time Clock
• Assignable Circuit Names and Custom
Circuit Names
• Special Circuit Functions
• Two Speed Pump Support
• English/Metric Support
• Sensor Calibration
• Passcode Protection
• USB port for use with a standard flash drive.
Save the complete system’s configuration,
upgrade the system’s firmware.

Pentair INTELLICENTER Specifications

General

Expandable	Yes
Energy Management	Yes
Touchscreen Display	Yes
Remote Access	Yes, via Mobile App
User Interface	Touchscreen
Remote Monitoring	Yes
Number of Circuits	Up to 40
Wireless Connectivity	Yes
Power Requirements	120V AC
Enclosure Rating	NEMA 3R