Pentair INTELLIFLO VSF - PUMP OVERVIEW > Introduction P; External Control P

PUMP OVERVIEW 1/3
The IntelliFlo
®
VSF Variable Speed and Flow Pump can be programmed to run at a speed
or a constant flow rate over set time intervals for maximum operating efficiency and energy
conservation for a variety of inground pools.
• The pump can operate from 450 RPM to 3450 RPM with four preset speeds of 750, 1500,
2350 and 3110 RPM, or the pump can be set to control its own speed and maintain a
constant flow rate.
• The pump can adapt to any application below 38 m³/h. Simply program the pump to suit
the application, and the pump will automatically determine perfect operating conditions
for that specific flow rate.
• Up to 8 customizable programs that can be set for constant flow or speed in either Manual,
Egg Timer or Schedule modes.
• Pump control panel alarm LED and error messages warn the user of improper operation
• Programmable priming mode with automatic detection of prime for easy start-up and
automatic detection of loss of prime.
The control panel can be mounted on the pump in four different directions in order to provide
the user the best access. The control panel can also be mounted in a more convenient
location with the help of the keypad relocation kit (to be sold separatly: P/N R356905).
INTRODUCTION
EXTERNAL CONTROL
The IntelliFlo
®
VSF pump can communicate with an IntelliPool control system or the
IntelliComm
®
communication center via a two-wire RS-485 communication cable. The
communication cable is included with the control system. IntelliComm
®
can remotely control
the IntelliFlo
®
variable speed four preset speeds. The IntelliPool system can be configured to
control speed in function of pool temperature, size and active features.
7