User Guide Riversoft
Ref. MKT-UG-045 / A - 13.03.2020 7 / 132
EN
2.3.2. Hygiene measures
DANGER
Do not use with water that is micro-biologically unsafe or of unknown quality without adequate
disinfection before or after the softener.
WARNING
Water softeners using sodium chloride for regeneration will add sodium to the water. Person who are
on sodium-restricted diets should consider the added sodium as part of their overall sodium intake.
Disinfection
• The materials used for the construction of our products meet the standards for use with potable water; the manufacturing
processes are also geared to preserving these criteria. However, the process of production, distribution, assembly and
installation, may create conditions of bacterial proliferation, which may lead to odour problems and water contamination;
• it is therefore strongly recommended to sanitize the products;
• maximum cleanliness is recommended during the assembly and installation;
• for disinfection, use sodium or calcium hypochlorite and perform a manual regeneration.
3 . Description
3.1. Technical specifications
3.1.1. General
Softener type
Riversoft ........................................................... 4L......................... 8L......................... 15L....................... 30L
Drain
Inlet
Outlet
Overflow
Riversoft with bypass configuration
Riversoft with manifold configuration
Brine tank connection
Overflow
Outlet
Drain
Inlet
Brine tank connection
Bypass
Manifold
Riversoft_368_604-606_UG_VX_Multilingual.book Page 7 Jeudi, 18. juin 2020 3:38 15
To Next Page
Loading...
