23800 /3612
34. Tv indication
a) Shutter speed at 1/1000
b) Lower pulley of Pulley seat assembly (0-M76) should be in parallel with camera.
c) Adjusting plate assembly (0-M68) — (M72) = left handed
d) Restitution spring assembly (0-M62) — (A5) — (M85)
* Turn wire 1 turn counter-clockwise around the pulley of (0-M62)
* After installing (0-M62), Tv wire should not be loose.
•If it is loose, give tension by moving (0-M68), but too much tension makes it harder to
adjust the position of Indication plate (M61).
e) (M73) — (0-M74) — (M75)
* Gear of (0-M62) and (0-M74) should be gearing not too deep, and check the function.
35. Mirror housing complete assembly (B000)
a) Battery seat assembly (0-A) — CNS 1.7 x 2.5 x 2
b) (B000) should be installed taking care of coupling two gears (M74) and (0-M53).
c) (E407) — (E408) — (E409) — W3
To Next Page
Loading...
