23800 /368
b.) Bottom winding mechanism
W16 — 0-C216 — C218 — W24 — C270 — C269 — C219 — C220 — C221 — C265
(left-handed)
Caution;
* W16 should be installed first separately from (C216), otherwise (C216) can not be installed
together with W16.
* When (C219) is installed, sprocket teeth should be positioned correctly as mentioned before.
Perforation is adjusted definitely here.
15. Reversing plate (E111) and hook plate
a.) E112 — C26 — W6 — E111 — C137
Check the function and play of (E111), the play should be
within 0.1mm
b.) W1-E153 — E155 — E154
16. Intermediate gears — Shutter cocked
a.) Sprocket teeth should be positioned correctly as mentioned before.
b.) b.) 0-E101
c.) Spill (E105)
d.) E104
Clearance between (E104) and (E105) should be desirably closer to (0), but (E105) must move up and
down smoothly without catching (E104).
To Next Page
Loading...
