169
6
Playback/Deleting/Editing
8 Press the OK button.
The edited image is saved with the recorded pixels of 3M.
To switch to the screen for registering a frame, press the Green button
in Step 5. You can register frames which you have downloaded from the
internet, etc. When you register a new frame, it replaces one of the
existing frames in the built-in memory. Before you can register a new
frame, copy it first to the SD Memory Card.
1 In the frame selection screen, select the frame you want
to remove and press the Green button.
A message appears and the frames on the SD Memory Card that you
can register in the built-in memory appear.
2 Use the four-way controller (45) to select the frame
you want to register and press the OK button.
The frame is registered in the built-in memory and replaces the frame
selected in Step 1.
The frame composite function cannot be used on movies or images
with any size of 3M or smaller. An error message appears in Step 4.
To Register a New Frame
When a new frame on the SD Memory Card is registered in the built-
in memory, it replaces one of the existing frames in the built-in
memory. The replaced frame is deleted from the built-in memory.
Visit the PENTAX website at the URL below to download new
frames.
http://www.pentax.co.jp/english/support/digital/frame_02.html
To Next Page
Loading...
Need help?
General
