184
7
Settings
You can change the USB Connection mode depending on whether the
USB cable is to be connected to a printer (PictBridge) or a computer.
1 Select [USB Connection] on the [H Set-up] menu.
2 Press the four-way controller (5).
The pull-down menu appears.
3 Use the four-way controller (23) to select [PC] or
[PictBridge].
4 Press the Q Playback button.
The camera is ready for playing back images.
Changing the USB Connection Mode
For details on connecting the camera to a computer, see “PC
Connection Manual” (a separate volume).
• Do not connect the camera to a computer when [Pictbridge] is
selected.
• Do not connect the camera to a printer when [PC] is selected.
How to recall the [H Set-up] menu
Four-way
controller
MENU button
OK button
Rec. Mode
MENU
Exit
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
AWB
12M
AUTO 800
MENU
To Next Page
Loading...
