187
7
Settings
By setting the LCD monitor to dim automatically when you leave the
camera without performing any operations for a certain period, you can
lessen battery drain. When Power Saving takes effect and the LCD
monitor dims, press any button to return to the ordinary brightness.
1 Select [Power Saving] on the [H Set-up] menu.
2 Press the four-way controller (5).
The pull-down menu appears.
3 Use the four-way controller (23) to select [2 min],
[1 min], [30 sec], [15 sec], [5 sec] or [Off].
4 Press the Q Playback button.
The camera is ready for playing back images.
Setting Power Saving
The Power Saving function will not work in the following conditions.
- In Playback mode
- When the USB cable is connected.
- While taking movies
- During the video output
- When using the AC adapter
- While using the LCD booster function
Set-up
MENU
Exit
Format
Sound
Date Adjust
English
World Time
Language/
Folder Name Standard
OK
To Next Page
Loading...
Need help?
General
