68
4
Taking Pictures
2 Use the four-way controller
(2345) to select a desired
mode.
For example, select q (Landscape mode).
3 Press the OK button.
4 Press the shutter release button
halfway.
The focus frame on the LCD monitor will light green when the camera
is in focus.
5 Press the shutter release button fully.
The picture is taken.
In Picture modes, Saturation, Contrast, Sharpness, White Balance
and AE Metering are automatically set to their default settings. You
cannot change these settings.
Landscape
OKMENU
OK
Cancel
Picture modes
To Next Page
Loading...
Need help?
General
