149
5
Editing and Printing Images
8
Use the four-way controller (23)
to select [Overwrite] or [Save as].
9
Press the 4 button.
Images processed with the filter are recorded with the same number of
recorded pixels and quality level as the original image.
5
Use the four-way controller (23) to select the digital
filter you want to use.
6
Use the four-way controller (45)
to adjust the effect.
The brightness increases each time you
press the four-way controller (5) and
decreases each time you press the four-
way controller (4).
7
Press the 4 button.
A confirmation dialog for overwriting the image appears.
When an image is protected, the image will be saved as a new image
without the following confirmation dialog displayed on the screen.
8
Use the four-way controller (23)
to select [Overwrite] or [Save as].
To Select a Brightness Filter
OK
OK
To Next Page
Loading...
