97
3
Taking Pictures
You can adjust the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or
underexposed.
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select
[EV Compensation].
3
Use the four-way controller (45)
to select the EV value.
To brighten, select a positive (+) value.
To darken, select a negative (–) value.
You can choose the EV setting in the range
of –2.0 EV to +2.0 EV in 1/3 EV steps.
4
Press the 3 button.
The camera returns to capture status.
Setting the Exposure (EV Compensation)
• When the histogram is displayed in Still Picture Capture/Playback
mode, bright portions and dark portions are indicated on the display,
enabling you to check the exposure (p.23).
• The EV compensation function cannot be used in 9 (Green) or
b (Auto Picture) mode.
• If you change the [EV Compensation] setting frequently, you can save
time by assigning it to the Green button (p.108).
Saving the EV Compensation Value setting 1p.115
MENU
2/3
0.0
Rec.Mode
1sec
Blink Detection
Instant Review
Memory
Movie
Digital Zoom
EV Compensation
Exit
To Next Page
