18
The display shows information such as the shooting conditions in the
capture mode.
The display changes in the following sequence each time you press the
4/W button: Normal Display, Histogram + Info, No Info.
Monitor Indications
Display in A Mode
• Y appears if you press the shutter release button halfway when
camera shake is likely to occur. To prevent camera shake, use a tripod
and/or the self-timer function (p.81).
• When the shooting mode is set to 9 (Green)
mode, the monitor display is as shown on the
right. You cannot change the information on
the display by pressing the 4/W
button.
07/07/2008
To Next Page
