151
5
Editing and Printing Images
6
Press the 4 button.
The edited image is saved with the same number of recorded pixels
and quality level as the original.
This function lets you add a decorative frame to still pictures. There are
80 frames already stored in the camera.
1
Enter the
Q
mode and use the four-way controller (
45
)
to choose the image to which you want to add a frame.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select Y (Frame
Composite).
4
Press the 4 button.
A 9-frame display of the frame selection screen appears.
5
Use the four-way controller
(2345) to choose a frame.
• The red-eye compensation function cannot be used on panoramic
images, movies or on images where red eyes cannot be detected on
the camera. An error message appears in Step 4.
• The red-eye compensation function can only be used with still pictures
taken with this camera.
Adding a Frame (Frame Composite)
MENU
To Next Page
