58
3
Taking Pictures
Taking Still Pictures
The Optio L60 features a wide range of shooting modes and functions to
suit almost any subject or scene. This chapter describes how to take
pictures with the most commonly used standard settings (the initial
factory default settings).
1
Press the power switch.
The camera turns on and is ready to take still pictures. In this manual,
this is called Still Picture Capture Mode.
2
Confirm the subject and shooting
information on the display.
The focus frame in the middle of the display
indicates the zone of automatic focusing.
When the camera recognizes a face, the
Face Recognition function is activated and
the face recognition frame appears (p.63).
You can change the captured area by pressing
the Zoom/
w
/
x
button to the left or right (p.69).
x (Right) enlarges the subject.
w (Left) widens the area that is
captured by the camera.
Taking Pictures
Shutter release button
Zoom/w/xbutton
Power switch
14:25
To Next Page
