88
3
Taking Pictures
8
Take the third frame.
Repeat Steps 5 to 7 to take the third frame.
The panorama stitching starts and a stitched image appears.
The stitched image does not appear when the Instant Review
(p.60, p.103) is off.
1
After shooting the first frame in Step 6 or second frame
in Step 7, press the 4 button or the four-way
controller (3).
A confirmation dialog appears.
2
Use the four-way controller (23)
to select an option and press the
4 button.
Save: Saves the captured image(s)
and you can retake the first
frame. When this option is
selected after shooting the
second frame, the first and the second frames are stitched
and saved as a panoramic photograph.
Discard: Discards the captured image(s) and you can retake the first
frame.
Cancel: Returns to the previous shooting screen.
• To minimize distortion when taking the second or third frame, turn the
camera so that it pivots around the right edge of the preview guide on
the screen.
• Some distortion may result from moving objects, repeating patterns,
or if nothing exists when overlapping the first and second frames or
the second and third frames on the preview guide.
• When the Face Recognition is activated (p.63), it works only when
taking the first frame.
To Cancel after Taking the First or Second Frame
Save
Discard
Cancel
To Next Page
