93
3
Taking Pictures
5
Press the 4 button.
The focus is fixed and the camera returns to capture status.
After the focus is fixed, you can press the four-way controller (5)
again to display the \ bar and readjust the focus.
You can change the autofocus area (Focusing Area).
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [Focusing
Area].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the Focusing Area
setting.
5
Press the 4 button.
The setting is saved.
Shooting mode and drive mode cannot be changed while the \ bar is
displayed.
To switch from \ to another focus mode, press the four-way controller
(5) while the \ bar is displayed.
To Set the Focusing Area
J
Multiple Normal autofocus area.
K
Spot The autofocus area becomes smaller.
W
Automatic Tracking AF Keeps moving subjects in focus.
MENU
1/3
10
M
AWB
AUTO
Rec.Mode
Recorded Pixels
Quality Level
White Balance
AE Metering
Sensitivity
Focusing Area
OK
OK
Cancel
To Next Page
